在夏季+40°C，冬季-20°C的卡拉庫沙漠里的土庫曼，光纖網已開通，這樣MICROSENS的工業以太網產品也在這一地區被使用。這個例子表明，工業以太網遠不止是辦公自動化。以太網作為全球唯一標準的協議，正在逐漸被運用到越來越多的領域。

Industrial Ethernet is not just a buzzword but rather a term for the use of Ethernet components with high reliability in tough conditions. Classical field-bus systems have long been on the way out. On one hand, the Ethernet solutions can be realised considerably more efficiently, and on the other, the merging with corporate networks that use Ethernet anyway is being pushed.

工業以太網不只是一個口號，而是在惡劣的環境下以太網組件高可靠性的代名詞。傳統現場總線系統早已過時。一方面，以太網解決方案的實現更為高效。在另一方面，MICROSENS正在推進與其他使用以太網的企業網絡的合并。

Furthermore, industrial Ethernet is the only global communication standard for the management and control of production processes. Existing proprietary standards tended to serve as protection for manufacturers of communication equipment and to tie the user to the respective company. Among others, this is also a reason why many efforts to establish a uniform industry standard have not been successful. Only Ethernet facilitates the combination of components from different manufacturers.

此外，工業以太網是管理和控制生產流程的全球唯一通訊標準?，F(xiàn)有的專有標準往往傾向于保護通信設備制造商，并把用戶綁定到所屬公司。另外，這也是下面問題的合理解釋，即人們?yōu)榻⒁粋€統一的行業標準付出了艱辛勞動，可最終一無所獲。只有以太網便于來自不同廠家的產品的組合。

Industrial Ethernet incorporates switches, hubs and media converters that are characterised by a special design. Attachment to 35 mm DIN top-hat rails, a power supply with 24 V direct current, an enhanced temperature range for operations and an increased protection class against dust or splash-water are typical of these appliances.

標準化組成元件

工業以太網的集成交換機、集線器和媒體轉換器都是特別設計的。35 mm DIN 頂帽子鐵，24 V直流電源，較大的作業溫差，增強防塵或防濺水之類的設備都是它里面的典型應用。

Furthermore, some components have special provisions for failure safety. In addition to the connection of redundant power supplies, special power supplies support fault-tolerant ring topologies, meaning that a disruption can be restricted to a maximum of one switch. If a connection line fails, the network can even continue to work entirely on its own. To facilitate rapid reaction times, fault recognition is usually carried out by newly developed mechanisms. Irrespective of this, the user can still resort to standards such as Rapid Spanning Tree.

此外，有些組成元件有專門的針對安全問題的特殊設備。除了連接冗余電源外，還可以連接支持容錯環狀拓撲的特殊電源，即可中斷其中任何一個交換機。如果一條連接線失敗，整個網絡依然可以繼續工作。為了方便快速識別錯誤，故障識別通常采用新機制。除這些外，用戶還可以采取其他途徑，如快速生成樹。

In the area of industrial networking, an intelligent combination of copper and fibre optic segments has prevailed on the market. On one hand, classical copper cables are used for the cost-effective connection of terminals such as machine controls, industry PCs, signalisation or monitoring systems to the network. On the other hand, fibre optics have established themselves for the connection between the switches, thanks to their favourable transmission features.

光纜超過銅纜

在工業網絡領域，銅纜和光纜的智能結合在市場上已很普遍。一方面，人們使用傳統銅纜是基于連接終端諸如機器控制，工控機，信號發送或監測系統等和網絡的連接成本考慮的。另一方面，由于光纖良好的傳輸特性，這樣交換機之間的連接更迅速。

When Fast Ethernet or Gigabit Ethernet is used, the same transmission speeds are realised on copper and fibre optic cables. However, the advantages of fibre optic lie in its insensitivity to electro-magnetic disruptive influences, in the greater transmission distances that can be realised and the simple handling for installation and routing.

當采用快速以太網或千兆以太網時，銅纜和光纜具有相同的傳輸速度。然而，光纖的優勢在于它不受電磁干擾的影響，可進行更長距離的傳輸以及它簡易的安裝和路由。